TORRIX M12 6S / 6B

TORRIX M12 6S / 6B

For applications with limited space

TORRIX M12 6, with its probe diameter of only 6 mm and a float diameter of as low as 18 mm, it is ideal for applications with smaller tanks. Another advantage is that there are no dead zones in the upper and lower areas. The starting point of the measurement is only defined by the size of the float; therefore the entire volume can be measured and used.

  • Length: 100 mm to 1,000 mm
  • Tube diameter: 6 mm
  • Smallest float diameter: 18 mm
  • Process temperature up to 125 °C.
  • ATEX and IECEx approval for use in Ex-Zone 0
FAFNIR Process Technology

HPH Ex d

High Pressure Connection Housing

  • On site display for level indication
  • Corrosion resistant (stainless steel 1.4305)
  • Adjustable display
  • 10 mm LED display
  • Easy to install
  • Intrinsically safe power supply for Ex-Zone 0
  • ATEX and IECEx approval
  • Robust design

    DOWNLOAD  

UM-X Transducer

UM-X

The control unit in a field housing for continuous level sensors

  • Easy menu-driven graphical user interface
  • Can be used with all sensors with a 4-20 mA interface
  • Intrinsically safe electrical circuit with ATEX approval (Ex ia)
  • Combined with TORRIX, approved as an overfill prevention
  • fulfilling the German Water Resources Act (WHG)
  • Pump control (alternating)
  • Continuous displaying the filling level
  • Filling levels can be displayed in mm, inches, % or mA

    DOWNLOAD  

Ex REPEATER/POWER SUPPLY

Ex REPEATER/POWER SUPPLY

PR Electronics PRetrans 5104B

  • Current loop : <28 V, max. 600 Ohm
  • Output : 4 - 20 mA
  • Auxiliary power : 24 - 230 V DC/AC
  • Hilfsenergie : 24 bis 230 V DC/AC
  • Snap-on mounting for DIN-rail

Below are examples of where the TORRIX is being used successfully:

Storage Tanks and Storage Containers

Storage Tanks and Storage Containers

TORRIX is ideally suited for measuring in all non-adhesive liquids and almost all tank geometries. There is no need to adjust the sensor to the liquid or the shape of the tank. Another advantage is that there are no dead zones in the upper and lower areas. The starting point of the measurement is only defined by the size of the float; therefore the entire volume can be measured and used.

Level Measurement Pilot plant and prototype systems

Pilot plant and prototype systems

The TORRIX 6 with his probe diameter of 6 mm and float diameter of 27 mm is ideal for applications in smaller containers. Unlike most sensors, TORRIX measures in the upper and lower region with no dead zone with the threshold point defined only by the float. The TORRIX is ideal in applications where frequent changes of media are needed as it does not require adjustment.

Download Order code 

Sales Engineer

Kevin Biehl
Phone: +49/40/39 82 07 - 83
Fax: +49/40/390 63 - 39
E-Mail: kevin.biehl@fafnir.de

Customer and Technical Support

Michael Stier
Phone: +49/40/39 82 07 - 14
Fax: +49/40/390 63 - 39
E-Mail: michael.stier@fafnir.de

Specifications:
Equipment Type
Magnetostrictive Level Measurement
Liquid
Chemicals
Fuel
Solvents
Water
Vessel
Laboratory Bottle
Waste Container
Measuring range
100.00 mm up to 1 000.00 mm
Stem diameter
6.00
Process Connection
Fitting
None
Temperature
-40.00 °C up to 125.00 °C
Pressure
-1.00 bar up to 16.00 bar
Certification
ATEX
IECEx
None
Signal output
4-20 mA
HART
RS-485 - FAFNIR Protocol
RS-485 - MODBUS (ASCII)
Power Supply
10 to 30 VDC
15 VDC
24 VDC
Addtitional criteria
Dry run protection
Electropolished

Ordering information