For conductive tanks
Even in sticky or dirty liquids, this sensor delivers reliable information about the level in the tank. Due to the small sensor head and the diameter of only 6 mm, you can use the CONDURIX almost anywhere. The sensor even functions in highly viscous liquids. The CONDURIX can be used in all electrically conductive liquids with a conductance ≥ 1 μS/cm. The one tube probe can be used in all conductive tanks.
- Maximum length: 4000 mm
- Sensor tube diameter: starting at 6 mm
- Process connection with all standard fittings and flanges
- Process temperature up to + 125 °C
- Fast response time of 200 ms
HPH Ex d
High Pressure Connection Housing
- On site display for level indication
- Corrosion resistant (stainless steel 1.4305)
- Adjustable display
- 10 mm LED display
- Easy to install
- Intrinsically safe power supply for Ex-Zone 0
- ATEX and IECEx approval
- Robust design
UM-X
The control unit in a field housing for continuous level sensors
- Easy menu-driven graphical user interface
- Can be used with all sensors with a 4-20 mA interface
- Intrinsically safe electrical circuit with ATEX approval (Ex ia)
- Combined with TORRIX, approved as an overfill prevention
- fulfilling the German Water Resources Act (WHG)
- Pump control (alternating)
- Continuous displaying the filling level
- Filling levels can be displayed in mm, inches, % or mA
Ex REPEATER/POWER SUPPLY
PR Electronics PRetrans 5104B
- Current loop : <28 V, max. 600 Ohm
- Output : 4 - 20 mA
- Auxiliary power : 24 - 230 V DC/AC
- Hilfsenergie : 24 bis 230 V DC/AC
- Snap-on mounting for DIN-rail
Below are examples of where the CONDURIX is being used successfully:
Sticky and viscous media
Acrylic glass manufacturing
The level measurement capability of CONDURIX is not affected by buildup on the sensor so it can be used to measure the sticky and strongly adherent precursors in the manufacture of acrylic glass.
Ceramic slurry
Even when extremely tough ceramic slurry is heated and despite a potential accumulation of several centimetres of product, CONUDRIX continues to delivers excellent results.
Production of cream
Similar to the acrylic glass manufacturing creams, gels and other strong adhesive media present a major challenge for level measurement. Once again, the CONDURIX is ideally suited to the applications because attachment of the media does not affect the measurements on the sensor.
Aqueous solutions
Bioreactors
CONDURIX is easily cleaned and is available with a hygienic process connection making it ideal for measuring the level in aqueous solutions used in bioreactors. Another strength of the sensor is that it is already available from a length of 150 mm and at the lower end, has a dead zone of only 3 mm. The CONDURIX is therefore well suited for use in test and pilot plants.
Wastewater treatment
For level monitoring in wastewater treatment systems CONDURIX is ideal, because the measurement is neither compromised by dirt or by crystallisation.
Other applications
Water detection
For the monitoring of fluids, such as the detection of water in the filter system for aviation fuel, the CONDURIX can be successfully used since it will selectively measure only the conductive liquid (water).
Sales Engineer
Kevin Biehl
Phone: +49/40/39 82 07 - 83
Fax: +49/40/390 63 - 39
E-Mail: kevin.biehl@fafnir.de
Customer and Technical Support
Michael Stier
Phone: +49/40/39 82 07 - 14
Fax: +49/40/390 63 - 39
E-Mail: michael.stier@fafnir.de
| Equipment Type | Potentiometric Level Measurement |
|---|---|
| Liquid | Acids Chemicals Solvents Wastewater Water |
| Vessel | Bulk Tank Underground Storage Tank |
| Measuring range | 150.00 mm up to 4 000.00 mm |
| Stem diameter | 4.00 mm up to 12.00 mm |
| Process Connection | Fitting Flange |
| Temperature | -40.00 °C up to 200.00 °C |
| Pressure | -1.00 bar up to 100.00 bar |
| Certification | ATEX None |
| Signal output | 4-20 mA HART |
| Power Supply | 10 to 30 VDC 15 VDC 24 VDC |
| Addtitional criteria | Dry run protection Electropolished |