CONDURIX MA

CONDURIX MA

For best results in small tanks

Due to the small sensor head and a tube diameter of only 8 mm (including the counter electrode), you can install the CONDURIX almost anywhere. The coaxial probe, where the measuring tube is surrounded by a grounded larger tube, is ideally suited for non-conductive containers such as glass containers in pilot plants or any other small tank.

  • Maximum length: 600 mm
  • Probe diameter: 8 mm
  • Normal temperature (min./max.) -40 °C to +125 °C
FAFNIR Process Technology

HPH Ex d

High Pressure Connection Housing

  • On site display for level indication
  • Corrosion resistant (stainless steel 1.4305)
  • Adjustable display
  • 10 mm LED display
  • Easy to install
  • Intrinsically safe power supply for Ex-Zone 0
  • ATEX and IECEx approval
  • Robust design

    DOWNLOAD  

UM-X Transducer

UM-X

The control unit in a field housing for continuous level sensors

  • Easy menu-driven graphical user interface
  • Can be used with all sensors with a 4-20 mA interface
  • Intrinsically safe electrical circuit with ATEX approval (Ex ia)
  • Combined with TORRIX, approved as an overfill prevention
  • fulfilling the German Water Resources Act (WHG)
  • Pump control (alternating)
  • Continuous displaying the filling level
  • Filling levels can be displayed in mm, inches, % or mA

    DOWNLOAD  

Ex REPEATER/POWER SUPPLY

Ex REPEATER/POWER SUPPLY

PR Electronics PRetrans 5104B

  • Current loop : <28 V, max. 600 Ohm
  • Output : 4 - 20 mA
  • Auxiliary power : 24 - 230 V DC/AC
  • Hilfsenergie : 24 bis 230 V DC/AC
  • Snap-on mounting for DIN-rail

Below are examples of where the CONDURIX is being used successfully:

Interface layer measurements where emulsions are present

Aqueous solutions

Bioreactors

CONDURIX is easily cleaned and is available with a hygienic process connection making it ideal for measuring the level in aqueous solutions used in bioreactors. Another strength of the sensor is that it is already available from a length of 150 mm and at the lower end, has a dead zone of only 3 mm. The CONDURIX is therefore well suited for use in test and pilot plants.

Interface layer measurements where emulsions are present

Wastewater treatment

For level monitoring in wastewater treatment systems CONDURIX is ideal, because the measurement is neither compromised by dirt or by crystallisation.

Interface layer measurements where emulsions are present

Other applications

Water detection

For the monitoring of fluids, such as the detection of water in the filter system for aviation fuel, the CONDURIX can be successfully used since it will selectively measure only the conductive liquid (water).

Download Order code 

Sales Engineer

Kevin Biehl
Phone: +49/40/39 82 07 - 83
Fax: +49/40/390 63 - 39
E-Mail: kevin.biehl@fafnir.de

Customer and Technical Support

Michael Stier
Phone: +49/40/39 82 07 - 14
Fax: +49/40/390 63 - 39
E-Mail: michael.stier@fafnir.de

Specifications:
Equipment Type
Potentiometric Level Measurement
Liquid
Acids
Chemicals
Solvents
Wastewater
Water
Vessel
Bulk Tank
Laboratory Bottle
Underground Storage Tank
Waste Container
Measuring range
100.00 mm up to 6 000.00 mm
Stem diameter
8.00
Process Connection
Fitting
Flange
None
Temperature
-40.00 °C up to 125.00 °C
Pressure
-1.00 bar up to 100.00 bar
Certification
ATEX
None
Signal output
4-20 mA
HART
Power Supply
10 to 30 VDC
15 VDC
24 VDC
Addtitional criteria
Dry run protection
Electropolished

Ordering information