For non-conductive tanks or in heavy duty applications
Even in sticky or dirty liquids, this sensor delivers reliable information about the level in the tank. Due to the small sensor head and the diameter of only 6 mm, you can use the CONDURIX almost anywhere. The sensor even functions in highly viscous liquids. The CONDURIX can be used in all electrically conductive liquids with a conductance ≥ 1 μS/cm. This two-tube probe is most suitable also for non-conductive tanks. However, it is often used in conductive tanks, since the second tube gives you more stability in large tanks, especially when you have strong agitation in the tank.
- Maximum length: 6,000 m
- Probe diameter: 6 mm
- Counter electrode: Ø 24 mm
- Normal temperature (min/max): -40 °C to +125 °C
HPH Ex d
High Pressure Connection Housing
- On site display for level indication
- Corrosion resistant (stainless steel 1.4305)
- Adjustable display
- 10 mm LED display
- Easy to install
- Intrinsically safe power supply for Ex-Zone 0
- ATEX and IECEx approval
- Robust design
The control unit in a field housing for continuous level sensors
- Easy menu-driven graphical user interface
- Can be used with all sensors with a 4-20 mA interface
- Intrinsically safe electrical circuit with ATEX approval (Ex ia)
- Combined with TORRIX, approved as an overfill prevention
- fulfilling the German Water Resources Act (WHG)
- Pump control (alternating)
- Continuous displaying the filling level
- Filling levels can be displayed in mm, inches, % or mA
Below are examples of where the CONDURIX is being used successfully:
Sticky and viscous media
Acrylic glass manufacturing
The level measurement capability of CONDURIX is not affected by buildup on the sensor so it can be used to measure the sticky and strongly adherent precursors in the manufacture of acrylic glass.
Even when extremely tough ceramic slurry is heated and despite a potential accumulation of several centimetres of product, CONUDRIX continues to delivers excellent results.
Production of cream
Similar to the acrylic glass manufacturing creams, gels and other strong adhesive media present a major challenge for level measurement. Once again, the CONDURIX is ideally suited to the applications because attachment of the media does not affect the measurements on the sensor.
CONDURIX is easily cleaned and is available with a hygienic process connection making it ideal for measuring the level in aqueous solutions used in bioreactors. Another strength of the sensor is that it is already available from a length of 150 mm and at the lower end, has a dead zone of only 3 mm. The CONDURIX is therefore well suited for use in test and pilot plants.
For level monitoring in wastewater treatment systems CONDURIX is ideal, because the measurement is neither compromised by dirt or by crystallisation.
|Equipment Type|| |
Potentiometric Level Measurement
Underground Storage Tank
|Measuring range|| |
200.00 mm up to 6 000.00 mm
|Stem diameter|| |
|Process Connection|| |
-40.00 °C up to 125.00 °C
-1.00 bar up to 100.00 bar
|Signal output|| |
|Power Supply|| |
10 to 30 VDC
|Addtitional criteria|| |
Dry run protection