Whenever its required to measure the level in a vessel that is subject to heavy vibrations the TORRIX Mobile is the perfect solution. No matter if the vibrations are caused by road, rail, sea or machines.
- M12 coupling for fast mounting
- Length: 100 mm up to 5000 mm
- Flange or fitting according to specification
- Process temperature of up to 85 °C.
- Process pressure up to 3 bar
- Available with 4 to 20 mA, 4 to 20 mA / HART, RS-485 interface and serial FAFNIR interface
- ATEX and IECEx approval for use in Zone 0
HPH Ex d
High Pressure Connection Housing
- On site display for level indication
- Corrosion resistant (stainless steel 1.4305)
- Adjustable display
- 10 mm LED display
- Easy to install
- Intrinsically safe power supply for Ex-Zone 0
- ATEX and IECEx approval
- Robust design
UM-X
The control unit in a field housing for continuous level sensors
- Easy menu-driven graphical user interface
- Can be used with all sensors with a 4-20 mA interface
- Intrinsically safe electrical circuit with ATEX approval (Ex ia)
- Combined with TORRIX, approved as an overfill prevention
- fulfilling the German Water Resources Act (WHG)
- Pump control (alternating)
- Continuous displaying the filling level
- Filling levels can be displayed in mm, inches, % or mA
Ex REPEATER/POWER SUPPLY
PR Electronics PRetrans 5104B
- Current loop : <28 V, max. 600 Ohm
- Output : 4 - 20 mA
- Auxiliary power : 24 - 230 V DC/AC
- Hilfsenergie : 24 bis 230 V DC/AC
- Snap-on mounting for DIN-rail
Below are examples of where the TORRIX is being used successfully:
Storage Tanks and Storage Containers
TORRIX is ideally suited for measuring in all non-adhesive liquids and almost all tank geometries. There is no need to adjust the sensor to the liquid or the shape of the tank. Another advantage is that there are no dead zones in the upper and lower areas. The starting point of the measurement is only defined by the size of the float; therefore the entire volume can be measured and used.
Pilot plant and prototype systems
The TORRIX 6 with his probe diameter of 6 mm and float diameter of 27 mm is ideal for applications in smaller containers. Unlike most sensors, TORRIX measures in the upper and lower region with no dead zone with the threshold point defined only by the float. The TORRIX is ideal in applications where frequent changes of media are needed as it does not require adjustment.
Sales Engineer
Kevin Biehl
Phone: +49/40/39 82 07 - 83
Fax: +49/40/390 63 - 39
E-Mail: kevin.biehl@fafnir.de
Customer and Technical Support
Michael Stier
Phone: +49/40/39 82 07 - 14
Fax: +49/40/390 63 - 39
E-Mail: michael.stier@fafnir.de
| Equipment Type | Magnetostrictive Level Measurement |
|---|---|
| Liquid | Chemicals Fuel Solvents Water |
| Vessel | Intermediate Bulk Container (IBC) Road Tanker Ship |
| Measuring range | 100.00 mm up to 6 000.00 mm |
| Stem diameter | 12.00 |
| Process Connection | Fitting Flange None |
| Temperature | -40.00 °C up to 85.00 °C |
| Pressure | -1.00 bar up to 16.00 bar |
| Certification | ATEX IECEx None |
| Signal output | 4-20 mA HART RS-485 - FAFNIR Protocol RS-485 - MODBUS (ASCII) |
| Power Supply | 10 to 30 VDC 15 VDC 24 VDC |
| Addtitional criteria | Dry run protection Electropolished Has integrated temperature sensor Vibration resistant |